3 Way Solenoid Valve 24vdc

Ningbo Yuxin Pneumatic Valve Co., Ltd. is one of the leading 3 way solenoid valve 24vdc manufacturers and suppliers in China. If you're going to buy cheap 3 way solenoid valve 24vdc, welcome to get quotation from our factory. All customized products are with high quality and competitive price.

 

Features

 

1.Directional control valves are one of the most fundamental parts in hydraulic machinery as well and pneumatic machinery. They allow fluid flow into different paths from one or more sources.

2.Valve bodies are mirror finished and Hard oxidation. Low power consumption, fast response. import oils seals with longer service life. Coils with DIN connection or flying leads.

 

3. inner pilot 3 Way Solenoid Valve 24vdc.

4. compact Structure and working action sensitivly and fast .

5. 3 port 2 way solenoid valve Three position function for your selection.

6. 3 way electric valve Double control type have memory function.

7. 3 way directional control solenoid valve manifold is available to save installation space.

8. smooth spool ,no burr and no stuck.

 

Ordering code

 

 

Model	3V110-M5	3V120-M5	3V110-06	3V120-06
Fluid	Air(to be filtered by 40μm filter element)
Acting	Internal pilot or external pilot
Port size	M5		1/8"
Orifice Size	5.5mm²(Cv=0.56)		12.0mm²(Cv=0.67)
Valve type	3 port 2 position
Lubrication	Not required
Operating pressure	0.15~0.8Mpa(21~114psi)
Proof pressure	1.2MPa(175psi)
Temperature	-15~50°C
Material of body	Aluminum alloy
Mount	Pipe inline or manifold plate
Connection form	Leading wire or DIN connector
Air outlet orifice	1mm
Highest action frequency	5 cycles per time
Insulation & protection class	IP65

 

Overall dimension

 

 

troubleshooting:

a.3 Way Solenoid Valve 24vdc does not work when energized

Check whether the power wiring is bad → re-wire and connect the connector.

Check whether the power supply voltage is within the ± working range - → adjust to the normal position range.

b.Whether the coil is desoldered → re-soldered.

Coil short circuit → replace coil.

Whether the working pressure difference is inappropriate → adjust the pressure difference → or replace the commensurate solenoid valve.

Fluid temperature is too high → replace the appropriate solenoid valve.

Impurities make the main spool and moving iron core of the solenoid valve stuck → clean, if the seal is damaged, replace the seal and install a filter.

The viscosity of the liquid is too high, the frequency is too high and the life is over → replace the product.

c.Solenoid valve does not close

The seal of the main valve core or the iron moving core is damaged → replace the seal.

Whether the fluid temperature and viscosity are too high → replace the corresponding solenoid valve

Impurities enter the solenoid valve core or moving iron core → clean.

The spring has expired or is deformed → replace.

The orifice balance hole is blocked → clean in time.

The working frequency is too high or the service life has expired → re-select the product or update the product.

d.Other situations

Internal leakage → check whether the seal is damaged and the spring is not properly assembled

External leakage → loose connections or damaged seals → tighten screws or replace seals

There is noise when the power is turned on → the solid piece on the head is loose and tightened. If the voltage fluctuation is not within the allowable range, adjust the voltage. Impurities or unevenness on the suction surface of the iron core should be cleaned or replaced in time.