Knowledge

Design characteristics of miniature solenoid valve

1. The solenoid valve core is the executive part of the solenoid valve, and its performance directly determines the performance of the solenoid valve, so the design of the solenoid valve core is very important. The influence of the structure type of the valve core on its suction is very important. The solenoid structure of the solenoid valve adopts spiral tube type. The air gap of the spiral tube electromagnet is in the middle of the excitation coil, and the suction and stroke are relatively large. It is suitable for controlling the opening and closing of valves as a control element.


2. Magnetic isolation ring design. The effective magnetic flux of the moving iron core determines the suction of the electromagnet. In addition to improving the magnetic induction intensity, to improve the suction of the electromagnet, it is necessary to reduce the magnetic leakage as much as possible, make as many magnetic induction lines pass through the moving iron core, and make the main working magnetic circuit unblocked, rather than the resistance of the non working magnetic circuit tends to infinity. It is better to add a section of non-magnetic material ring in the electromagnet core to block the magnetic leakage of non working magnetic circuit.


3. The solenoid of the solenoid valve adopts frameless winding. The enamelled wire is wound directly on the electromagnet core to form the core electromagnetic coil, which is then threaded with the electromagnetic shell to reduce the volume. The solenoid coil is positioned through threaded connection without glue injection. In addition, the coil is in direct contact with the electromagnet iron core, which is conducive to the heat dissipation of the electromagnet; At the same time, permanent magnets are added to the magnetic core to form a bias magnetic field and improve the response speed.

miniature-pneumatic-solenoid-valve36170812634

You Might Also Like

Send Inquiry