Solenoid Valve Ip68 Waterproof

Ningbo Yuxin Pneumatic Valve Co., Ltd. is one of the leading solenoid valve ip68 waterproof manufacturers and suppliers in China. If you're going to buy cheap solenoid valve ip68 waterproof, welcome to get quotation from our factory. All customized products are with high quality and competitive price.

 

1:2-way normally closed solenoid valve,Closed when de-energizes,open when energized.

2: Serialized products,small in size .large flow rate,widely use

3:Body material:forged brass orifice 10.5mm

4:Ambient Temp 0-65 fluid temp 0-130 max pressure 17bar

5:flow as the arrow,mounts in any position :best position is solenoid vertical and upright direction.

6:Voltage:220VAC/230VAC/240VAC/110VAC/24VAC 50/60HZ 24VDC/12VDC

Voltage tolerance:+10% to -10% applicable voltage

7:This series valves are offered NBR VITON EPDM etc

for series and diaphragm to provide on-off control of various fluids.

 

Features

 

 

1) This type of Solenoid Valve IP68 Waterproof can used for underwater solenoid valve and unde rwater fountain solenoid valve . match with waterproof solenoid coil . keeping long time working at the humid environment  .

2) IP68 Waterproof Solenoid Valve has different body material and different orifice to choose .

3) IP68 grade solenoid coil and super quality stainless steel valve core ,has a good anti-corrosion function.

4) Power cord wire 1 meter length,customs logo and packages for wholesaler at discounted price .

 

How to order

 

 

Product Parameter

 

product name	Water Fountain Solenoid Valve
working medium	water
model	SLDF-40
port size	G 1-1/2" , NPT1-1/2"
way and position	2 Position 2 way
material of body	Brass or stainless steel
Operating pressure	0~6 bar
orifice	40 mm
initial status	Normally closed
working mode	Direct drive
working voltage	DC12V DC24V, AC220V, AC110V, 50/60HZ
Temperature Range	NBR for –5-80°C; VITON for –5-150°C
seal material	NBR ,VITON
CV valve	30
Ambient Temperature	-5~60℃
Insulation & Protection grade	IP68 H Class

 

 

Working Principle:

 

Solenoid Valve IP68 Waterproof is a special solenoid valve designed for the solenoid valve diving. The coil is packaged with special materials, which is safe and reliable. The valve can be opened and closed quickly. It is especially suitable for waterway control of music fountain, running spring and jumping spring.

 

There is a closed cavity in the solenoid valve, through holes are opened at different positions, each hole leads to a different oil pipe, the middle of the cavity is a valve, the two sides are two electromagnets, and the magnet coil on which side is energized by the valve. The valve body will be attracted to which side, by controlling the movement of the valve body to block or leak different oil discharge holes, and the oil inlet hole is normally open, the hydraulic oil will enter different oil discharge pipes, and then pass through the oil discharge pipe. The pressure pushes the piston of the oil, the piston drives the piston rod, and the piston rod drives the mechanical device to move. In this way, the mechanical movement is controlled by controlling the current of the electromagnet."