2 Way Pneumatic Solenoid Valve

Ningbo Yuxin Pneumatic Valve Co., Ltd. is one of the leading 2 way pneumatic solenoid valve manufacturers and suppliers in China. If you're going to buy cheap 2 way pneumatic solenoid valve, welcome to get quotation from our factory. All customized products are with high quality and competitive price.

1) It's a direct acting 2 way pneumatic solenoid valve. as for a air pump solenoid pneumatic valve 2 way,mini and compact pneumatic 2 way solenoid valve . also can be used for RO system to control the flow on and off as request.

2). Electrical selection: It is more convenient to choose AC220V and DC24 for voltage specifications as far as possible.

3). Choose according to the length of continuous working time: normally closed, normally open, or continuously energized:

a. When the solenoid valve needs to be opened for a long time, and the continuous time exceeds the closing time, the normally open type should be selected.

b. If the opening time is short or the opening and closing time is not long, the normally closed type is selected.

c. However, for some working conditions used for safety protection, such as furnace and kiln flame monitoring, the normally open type cannot be selected, and the long-term power-on type should be selected.

 1. Before use the 2 Way Pneumatic Solenoid Valve, pay attention to check whether the components are damaged during transportation, and then install and use;

 2. When installing, the coil should be vertically upward, and the inlet and outlet of the valve body should be kept horizontal; and please pay attention to the direction of fluid flow (pay attention to the "→" direction ) and whether the takeover tooth is correct. The medium used must be filtered by a 40μm filter element; 

3. Please pay attention to whether the installation conditions meet the technical requirements (such as "working pressure", "use temperature range", "use voltage range", etc.), and then install and use;

4. Try to avoid vibration Use in the environment, and pay attention to the anti-freezing measures at low temperature; 

5. When connecting the main pipeline, pay attention to the wrapping of the leak-proof belt not to exceed the end face of the joint teeth, and pay attention to remove dust, iron filings and other stolen goods in the pipeline joint; 6. Please pay attention to prevent Dust, remove the dust cover should be installed in the inlet and outlet when not in use.