Knowledge

Technical requirements for electromagnetic pulse valves: 1. The working pressure of the product is 0.1 MPa~0.7 MPa, and the medium is air that has been degreased and dehydrated. 2.

The main models of pulse valves are shown in the following points. 1. Right-angle electromagnetic pulse valve: The right-angle pulse valve, full name "right-angle electromagne

Right-angle electromagnetic pulse valve: The angle between its inlet and outlet is 90 degrees, which is suitable for the installation and connection of the air storage cylinder and

Solenoid valve is an automatic basic component used to control fluids and belongs to an actuator; it is not limited to hydraulics and pneumatics. Solenoid valves are used to contro

Floating pneumatic ball valve: simple structure, good sealing, but the load of the working medium borne by the ball is all transmitted to the outlet sealing ring, so it is necessar

Explosion-proof solenoid valves are devices that can work safely and reliably in hazardous environments. They control the on and off of the medium through electromagnetic force, th

Right-angle pulse valve (DMF-Z series) The right-angle pulse valve (DMF-Z series) is a member of the pneumatic pulse valve family and has unique structural characteristics. From th

As an important component of industrial pipelines, pneumatic valves are divided into two categories: air-open valves and air-close valves according to different working properties

Among many types of pneumatic valves, pneumatic butterfly valves stand out with their unique characteristics and advantages and have been widely used in many fields. Simple structu

The characteristic of the right-angle pulse valve is that the air inlet and outlet pipes of the valve are at a 90° right angle. The diaphragm in the valve divides the electroma

The operation of pneumatic pulse valve depends on the working state of the valve controlled by air pressure drive and pneumatic signal. It is mainly composed of air pressure supply

solenoid valves The solenoid valve is a valve that relies on the electromagnetic force generated by the power supply coil to drive the active iron core to open and close the valve