Daily maintenance and care precautions for pneumatic valves
Daily maintenance and care for pneumatic valves mainly includes three methods: scheduled maintenance, proactive maintenance, and emergency maintenance. Scheduled maintenance involves regularly inspecting the pneumatic valves, which helps to identify problems early and prevent them from escalating. Proactive maintenance involves analyzing the working condition of the pneumatic valve and replacing any problematic components immediately, also preventing problems before they occur. Emergency maintenance is different. Emergency maintenance is a solution taken after the pneumatic valve has already malfunctioned, which can disrupt production plans and cause unnecessary financial losses.
Daily Maintenance and Care Precautions for Pneumatic Valves:
1. Replacement of Pneumatic Actuator Diaphragm. The diaphragm of a pneumatic diaphragm actuator is subjected to expansion and contraction during operation, making it prone to fatigue damage. When replacing, use a plastic diaphragm of the same model, and ensure even force distribution on the diaphragm during tightening to prevent leakage and diaphragm crushing.
2. Grinding. After a certain period of operation, leakage may occur between the valve core and valve block. Internal structural leakage can also occur between the piston rod and cylinder head. In such cases, grinding is necessary. Methods include manual grinding, mechanical cutting, coating treatment, and inserting. The abrasive grit used for grinding should have an appropriate particle size distribution, and the grinding force should be uniform and suitable. After grinding, polishing should be performed to meet the required smoothness and precision level, taking into account the specific alignment requirements of the valve core and high-pressure gate valve. A sealing test should be performed on the pneumatic valve after assembly.
3. Replacement of the stuffing box: Properly disassemble the stuffing box to avoid damaging the valve seat. New stuffing box installation should follow the instructions. The opening should be repositioned to avoid scratching the stuffing box by the valve seat threads. The stuffing box clamping force should be uniform and suitable to avoid stress and increased friction.
4. Replacement of mechanical components: If any mechanical component in the pneumatic valve and accessories is damaged, it can be replaced or repaired. After replacement or repair, ensure the transmission system is flexible and the clearance in the transmission system is as small as possible.
5. Cleaning of pneumatic amplifiers. If the orifice of a pneumatic amplifier is blocked by waste in the compressed gas, cleaning the orifice is necessary. Appropriate stainless steel wire can be used for unblocking and cleaning.

