Maintenance methods for pneumatic control valves
The maintenance and upkeep of pneumatic control valves is of great significance for ensuring their normal operation and extending their service life. The following are the maintenance methods for pneumatic control valves:
1. Storage environment
Pneumatic control valves should be stored in a dry and ventilated room, and the channels should be blocked on both sides. Pneumatic control valves stored for a long time should be regularly inspected, cleaned of dirt, and coated with rust proof oil on the processing surface.
2. Installation inspection
After installation, regular inspections should be carried out, mainly including the wear of the sealing surface, the wear of the trapezoidal threads on the valve stem and valve stem nut, and whether the packing is outdated and ineffective.
Check the pressure resistance and corrosion resistance of the inner wall of the intermediate, whether the valve seat is loose, whether the valve core is corroded or worn, and the condition of the sealing packing.
3. Lubrication and cleaning
The valve stem thread often rubs against the valve stem nut and needs to be coated with a little yellow thin oil, molybdenum disulfide or flake graphite to provide lubrication.
For pneumatic control valves that do not open and close frequently, it is also necessary to frequently rotate the handwheel and apply lubricant to the valve stem threads to prevent biting.
Regularly maintain the cleanliness of the pneumatic control valve and maintain good hygiene of the control valve and all components.
4. Professional maintenance
Clean and lubricate each component to prolong the service life of the pneumatic control valve.
Pneumatic control valves stored for a long period of time should be maintained, waste should be eliminated, and anti rust agents should be applied to the production surface.
5. Testing and troubleshooting
The failure of pneumatic control valves during use can pose a significant threat to the normal and stable operation of the system. Therefore, it is necessary to maintain the control valves to reduce the incidence of valve failures.
When using graphite asbestos as packing for the regulating valve, lubricating oil should be added to the packing for about three months to ensure the flexibility and usability of the regulating valve.

